Please remember: although charging is complimentary, please charge only
to 80%. Once charging is complete, be sure to remove the charger from
your vehicle.
SELECT FIRMWARE
Click the firmware file below to flash it to your device. You can also add your own .bin file.
📁
Add a different .bin file
click to browse, or drag & drop
⚠ Connect your device first — then click the file to flash it.
⚡
MIDNIGHT
Powered by MF CERTIFIED
Disconnected
Guide
Quick Start
1
Click Connect
2
Select "JTAG .." device
3
Flash Now
?? Device not showing?
Put it in programming mode:
1. Hold the BOOT button
2. Tap the RESET button
3. Release the BOOT button
Alternative: Disconnect USB, hold BOOT while reconnecting USB, then release.
Serial
Connection
115200
Flash
Firmware
Click below to open the firmware, then click the file to flash it to your device.
System Log
Welcome.Ready to connect...
⚡ Having issues with charging?
Try the following two steps before anything else:
1
Get inside the car and close the door. Go to Safety → Power Off, wait 5 seconds, then retry charging.
2
Make sure all doors are closed and the charge cable is disconnected before retrying.